Відео

Thanks a lot for this video!

What are the torque specs?

does anybody know what this conversion kit is called and where to buy it from thank you in advance...

Great video 📹

Hello, where can we buy the aluminum adapter kit?

I have the ultimate cf sl 7. This vid is great and super easy to follow. I appreciate you sharing this!

Thank you for the video. What is the part number and where did you order the bearings?

I'm ask what size spokes

Тоже сделал уже хабдоктор

First time I've seen that paint trick for alignment. Genius stuff.

Alter Schwede!

Too much hometrainer!

how can i find this kit???

helo may i know what was the exact produc name of the KIT on ebay thanks

What bar tape is this? Looks very nice :)

Thanks Steve. I have the same bike. One question, I heard that those Acros bearings have a side up and and a side down. I have checked a pair I have but haven’t seen any arrows or other. Is that true? Reversing the sense when mounting them can be fatal. Thx

Great video, thanks.

Hi, if you're still reading the comments: I just bought a used Canyon Ultimate off someone, and the out-front mount of the H36 is chronically loose. The bolts tighten up while there is still wiggle room (1-2mm) for the plastic cover & outfront mount. Am I missing a layer of some kind? Currently I just have the two long screws through the plastic cable cover and the out-front mount. I cannot find a manual or anything online so far. I could just fill the wiggle room up with some foam but I find it very odd, so I wanted to check. If you know more, I'd love to hear it!

what is the bearing info in the upgrade kit

Do you need to lube any parts of the cockpit or fork when putting it all back together? Do the bearings require extra lube?

nice video mate!

*Looked at a lot of options for getting my **Latest.Bike** . Great find in SAVA. Super light, nice components, really good value as it comes with many options only found in much higher priced bikes.*

*Looked at a lot of options for getting my **Latest.Bike** . Great find in SAVA. Super light, nice components, really good value as it comes with many options only found in much higher priced bikes.*

you need to clarify the content

Thank you for posting this. Great use of a vice to install the bearing adapter and bearing. Cheers!

Did this to my elite’s some years ago still going strong.👍

4:09 "...and cut the steerer tube if necessary". It seems like voluntary step, however in case, I want to keep aerocockpit in the same height as I am used with my standard cockpit, do I need to cut any lenght ? I have Grizl, meaning Stem V13 90mm. Please advise.

Lmao imagine paying 1000 dollars for wheels with plastic bearings idiotic, new bikes are really made for fools.

Ужасное качество у продукции

Good video. Just what I needed 👍

Hi, I've got a cp10 cockpit. The last bottom most bolt where you use the Allen key to tighten is protruding out after I tightened it. How should I go about it to make it go back into the gasket?

Hi Steven, I would like to ask you for your advice again. Should I put some carbon gripper paste into of steerer tube (fork) where the wedge expander is seated? Because when I wanted to set up height of my cockpit H31 or put it down I could not tighten the cap screw for 2Nm. The screw started cracking and plastic liner has been broken. The wedge expander been pulled up. That means that I wanted to tighten the cap screw for 2 Nm and the wedge expander is pulled up through cap screw. Would you be so kind and if it possible to send me copy of instalation manual for your upgraded cockpit or write me an answer. Thank you very much I appreciate your help. Kind regards. Libor Nemcok

The secret to removing that upper bearing wedge is to knock the steer tube from the side with a mallet. Hit it enough times and it should knock the two parts away from each other.

Hi Steven, thank you very much for your video. I would like to ask you How should I tighten the clamping screw on the top cap for adjust the bearings. Should I use a torque wrench and tight the clamping screw to 2 Nm. I Have Canyon Cockpit H 31.

Maybe i missed it, but what is the right headset bearing? In the Inet i found this "is44/is44 bearing set including centering ring. The two bearings in the dimensions 44x35x5,5 and 44x33x6 are used in the models Endurace CF SLX / CF SL / CF, Grail, Inflite CF SLX & Ultimate CF EVO / SLX / SL, among others. " But on the website the set costs €60. under an other video i found: Upper: 6707-2RS, Inner x Outer x Depth (mm): 35 x 44 x 5 Bottom: AC3748, Inner x Outer x Depth (mm): 37 x 48 x 7 with one 45° chamfer on inner side but i think this is for an older version. Where do you buy your replacement?

These bearings are very poor in quality and the cover design is poor too, mine only last 9 months, had difficulty removing them with a lot of rust. I have an Endurace CL SL 8.0, had to order it directly with Canyon, nobody has it locally. Order at least two pair. Advice: remove it and grease it frequently.

Hey there, I have installed the hubdoctor kit, but now my my crankset is moving in drivnig direction when the wheel is durning. This is not what I have expected. Any idea what went wrong?

Thanks for the video. The update works well and the backlash due to the horrible plastic bushing is now permanently fixed. Just one IMPORTANT note about the reassembly of the freewheel after the replacement of the bushing with the bearing: the original seal placed in the rear part must be disassembled. In the video this step is missing!

Thanks, very helpful. First attempt I failed to reinstall the rubber seal on the top set of bearings. Let’s just say the result was rough….

Thanks for sharing the detailed video. Perhaps this is an ignorant question, but is a headset press not required to seat the bearings?

Hi i not an ultimate 2017 .. where can i get those bearings online in USA .. is been imposible to find them !! tks for video very helpful

Hey, what is the reference of these bearings please?

great video. on canyon website when you want to purchase the H36 cockpit, you have to choose a length size but I have no idea what size should I get? I am on H17 and H13 set up and I dont know what is the current size of my cockpit so i could find a match! any hint?

Did you cut the excess tube or put extra spacer?🚴🏽‍♂️🚴🏽‍♂️🚴🏽‍♂️

Very helpful. I had some headset play in my new Ultimate CF SLX 8. I took it apart, bearings looked fine, no damage to carbon either. Saw your video and I learned that my bolt tightening sequence was incorrect. So I loosened everything and re-tightened starting with the load on the bearings (i.e. the cover), then the integrated stem/handlebars, and finally the bottom bolt that holds the fork in place. Play fixed! Thanks!

Qué medidas de rodamientos son? Gracias

dove posso acquistare il kit di modifica per una ruota mavic sys

What happens if the battery runs out? And u are stuck in a hard gear up a hill climb?

I want to oredr the new bearings for Ultimate CFSLX build 2018 and can not faunded the order number on Canyon.com

... grease on bearings???..